UniSoft Geotechnical Solutions
Articles by "Softwares"
Showing posts with label Softwares. Show all posts
Bentley STAAD.Pro Connect Edition v21
S.T.A. DATA 3Muri Pro UpDated
S.T.A. DATA 3Muri Pro v11.0.0.10 [Size: 158 MB] ... 3Muri is a software for analysis of
structures built in masonry and mixed materials through a non-linear
(pushover) and static analysis. The strengths of 3Muri is its
innovative computation method (FME) that is able to give more
information on the structure’s real behaviour to seismic actions, aside
an extreme simplicity of use. 3Muri offers a drawing area for insertion
of the structure with intuitive controls, an engine for the creation of
computation models and their solutions, and a post-processor for
immediate presentation of the results and creation of the computation
report.3Muri was created by a joint project of S.T.A. DATA and the research group headed by Professor Sergio Lagomarsino, from the Construction Technique department of Genova University. Along with other specialists (eng. Andrea Penna and eng. Alessandro Galasco from Pavia’s Eucentre, and eng. Serena Cattari, Genova University) they finalized the theoretical aspects of 3Muri through laboratory’s experiments and analysis on real structures. That continuous collaboration guarantee an always updated software, completely operative and reliable for the most professional requirement.
Golden Software Strater UpDated
Lindo Lingo v17: Optimization Modeling Software
FIDES DV-Partner Suite UpDated
FIDES DV-Partner Suite 2017 [Size: 866 MB] ... FIDES DV-Partner are two German system vendors based in Berlin and Munich. With experience resulting from more than 30 years providing services for civil engineering we comprehend the mission of FIDES today as a partner for structural designers, constructing engineers and architects applying high quality software. The range of the offering solutions for structural design contains building, steel, tunnel and bridge design, geotechnical or rather soil engineering up to special constructions like light weight structures. Retainment Walls + Slopes/Embankments + Foundations/Base Plates + Tunneling Constructions + Structural Steelwork.Minitab: Powerful Statistical Software
SRS1 Data Curve Fit Creator Add-In
Bentley STAAD Foundation
ENERCALC Structural Engineering Library
All modules in Version 6 conform to IBC 2006/2009/2012/2015, CBC 2007/2010/2013, ASCE 7-05/7-10, ACI 318-05/08/11/14, ACI 530-05/08/11/12, AISC 360-10, NDS 2015, 2012 & 2005.
The calculation module list is an ever-expanding set of structural calculations that provide analysis and design for the elements of a building. As requests are received from our users we develop additional modules ... and make use of the proven steel, concrete, timber, finite element analysis, and other engineering “solvers” we have developed.
Essential to any project are the standard construction products that the engineer will employ to develop the final structure. ENERCALC provides databases of all typical rolled steel sections, sawn wood and engineered lumber sections, material grades for steel and wood and small databases for concrete block and rebar. In addition the user can create their own steel section databases and also mark “favorite” items in all databases to simplify the work according to their most frequent needs.
ENERCALC software provides well designed calculation reports for all of its modules. Using the full capabilities of modern printers we combine highly readable font styles with well laid out calculation reports and integrated graphics.
The goal of our reports is to provide clarity and efficiency. This benefits the reviewing engineer and governmental plan check reviewer by providing well laid out, concise and thorough report that details the structural design. New technology has given us the gift of low cost color on printouts, and this benefits us all by allowing us to incorporate contrasting colors to call attention to warnings or overstress conditions.
All printouts conform to 8.5” x 11” typical United States paper sizes, and the user is also free to customize title block layouts and add company logos and a P.E. seal.
Geovariances ISATIS 2016
Isatis assets: State of the art and industry benchmark geostatistics + Fast, optimized parallel algorithms + Powerful and fast 3D Viewer + Numerous interfaces with professional standard software packages allowing to load a wide variety of data and output the results in a format best suited to your needs + Batch functionalities enabling automatic procedures for updating and easy reproduction of workflows + Journaling file system for auditing + Immediate access to high-quality on-line documentation and technical references + Unlimited access to technical support provided by specialists in geostatistics.
Rocscience Phase2 v9
Rocscience Phase2 v9.014 [Size: N/A MB] ... RS2 (Phase2 9.0) is a powerful 2D finite element program for soil and rock applications (RS2 = Rock and Soil 2-dimensional analysis program). RS2
can be used for a wide range of engineering projects and includes
excavation design, slope stability, groundwater seepage, probabilistic
analysis, consolidation, and dynamic analysis capabilities.
Complex, multi-stage models can be easily created and quickly
analyzed - tunnels in weak or jointed rock, underground powerhouse
caverns, open pit mines and slopes, embankments, MSE stabilized earth
structures, and much more. Progressive failure, support interaction and a
variety of other problems can be addressed. RS2 offers a wide range of support modeling
options. Liner elements can be applied in the modeling of shotcrete,
concrete, steel set systems, retaining walls, piles, multi-layer
composite liners, geotextiles, and more. Liner design tools include
support capacity plots, which allow you to determine the safety factor
of reinforced liners. Bolt types include end anchored, fully bonded,
cable bolts, split sets, and grouted tiebacks. One of the major features of RS2 is finite
element slope stability analysis using the shear strength reduction
method. This option is fully automated and can be used with either
Mohr-Coulomb or Hoek-Brown strength parameters. Slope models can be
imported or exported between Slide and RS2 allowing easy comparison of limit equilibrium and finite element results. RS2 includes steady-state, finite element
groundwater seepage analysis built right into the program. There is no
need to use a separate groundwater program. Pore pressure is determined
as well as flow and gradient, based on user defined hydraulic boundary
conditions and material conductivity. Pore pressure results are
automatically incorporated into the stress analysis. Material models for rock and soil include Mohr-Coulomb, Generalized
Hoek-Brown and Cam-Clay. Powerful new analysis features for modeling
jointed rock allow you to automatically generate discrete joint or
fracture networks according to a variety of statistical models. With new
64-bit and multi-core parallel processing options RS2 can solve larger and more complex models in shorter times.
Complex, multi-stage models can be easily created and quickly
analyzed - tunnels in weak or jointed rock, underground powerhouse
caverns, open pit mines and slopes, embankments, MSE stabilized earth
structures, and much more. Progressive failure, support interaction and a
variety of other problems can be addressed. RS2 offers a wide range of support modeling
options. Liner elements can be applied in the modeling of shotcrete,
concrete, steel set systems, retaining walls, piles, multi-layer
composite liners, geotextiles, and more. Liner design tools include
support capacity plots, which allow you to determine the safety factor
of reinforced liners. Bolt types include end anchored, fully bonded,
cable bolts, split sets, and grouted tiebacks. One of the major features of RS2 is finite
element slope stability analysis using the shear strength reduction
method. This option is fully automated and can be used with either
Mohr-Coulomb or Hoek-Brown strength parameters. Slope models can be
imported or exported between Slide and RS2 allowing easy comparison of limit equilibrium and finite element results. RS2 includes steady-state, finite element
groundwater seepage analysis built right into the program. There is no
need to use a separate groundwater program. Pore pressure is determined
as well as flow and gradient, based on user defined hydraulic boundary
conditions and material conductivity. Pore pressure results are
automatically incorporated into the stress analysis. Material models for rock and soil include Mohr-Coulomb, Generalized
Hoek-Brown and Cam-Clay. Powerful new analysis features for modeling
jointed rock allow you to automatically generate discrete joint or
fracture networks according to a variety of statistical models. With new
64-bit and multi-core parallel processing options RS2 can solve larger and more complex models in shorter times.Plaxis 3D Foundation
Plaxis 3D Foundation v1.6.0.193 [Size: 138 MB] ... PLAXIS 3D is a finite element package intended for three-dimensional analysis of deformation and stability in geotechnical engineering. It is equipped with features to deal with various aspects of complex geotechnical structures and construction processes using robust and theoretically sound computational procedures. With PLAXIS 3D, complex geometry of soil and structures can be defined in two different modes. These modes are specifically defined for Soil or Structural modelling. Independent solid models can automatically be intersected and meshed. The staged constructions mode enables a realistic simulation of construction and excavation processes by activating and deactivating soil volume clusters and structural objects, application of loads, changing of water tables, etc. The output consists of a full suite of visualization tools to check details of the complex inner structure of a full 3D underground soil-structure model. PLAXIS 3D is a user friendly 3d geotechnical program offering flexible and interoperable geometry, realistic simulation of construction stages, a robust and reliable calculation kernel, and comprehensive and detailed post-processing, making it a complete solution for your daily geotechnical design and analysis.FineSoftware GEO5 2016
Solutions for Most Geotechnical Tasks: GEO5 is designed to solve most geotechnical tasks, from the basic ones (verification of foundations, walls, slope stability), up to highly specialized programs (analysis of tunnels, building damage due to tunneling, rock stability). Each GEO5 program solves definite structure type, so the customer can only select those he needs.
Combination of Analytical Methods and FEM: Analytical verification methods provide effective and rapid structure design and verification. It is possible to transfer the analytical model into the FEM program, where the structure is verified by the finite element method. Comparison of two independent solutions contributes to increasing the safety and objectivity.
Rocscience Settle 3D
Rocscience Settle 3D v2.016 [Size: 28 MB] ... Settle3D is a 3-dimensional program for the
analysis of vertical consolidation and settlement under foundations,
embankments and surface loads. The program combines the simplicity of
one-dimensional analysis with the power and visualization capabilities
of more sophisticated three-dimensional programs.
You can quickly create complex soil profiles and loading conditions,
and view results in 3-dimensions. Modeling can be staged, and
time-dependent consolidation analysis can be performed including primary
and secondary consolidation (creep) at user defined time intervals. A
variety of linear and non-linear material types can be modeled.
Groundwater elevation can be staged and horizontal and vertical drainage
conditions can be specified. Circular, rectangular or polygonal load shapes can be defined with
uniform or variable load magnitudes, and flexible or rigid foundations.
Loading can be staged and applied at any depth (e.g. to simulate piles
or raft foundations). Excavations can be defined and loads applied
within excavated areas. A special embankment designer allows you to
easily define multi-stage layered embankments. Back analysis options
allow you to determine the pre-load fill height or time required to
achieve a given settlement. Settlement, stress and pore pressure are computed throughout the
3-dimensional volume, and results can be contoured along any horizontal
or vertical plane, or plotted along any line. Settlement deformation can
be viewed in 3-dimensions, magnified by a user-defined scale factor.
Data presentation is highly interactive, and contours and graphs are
updated in real time as you change the data type, depth or location.
Results can be exported to Excel with a single mouse click.
You can quickly create complex soil profiles and loading conditions,
and view results in 3-dimensions. Modeling can be staged, and
time-dependent consolidation analysis can be performed including primary
and secondary consolidation (creep) at user defined time intervals. A
variety of linear and non-linear material types can be modeled.
Groundwater elevation can be staged and horizontal and vertical drainage
conditions can be specified. Circular, rectangular or polygonal load shapes can be defined with
uniform or variable load magnitudes, and flexible or rigid foundations.
Loading can be staged and applied at any depth (e.g. to simulate piles
or raft foundations). Excavations can be defined and loads applied
within excavated areas. A special embankment designer allows you to
easily define multi-stage layered embankments. Back analysis options
allow you to determine the pre-load fill height or time required to
achieve a given settlement. Settlement, stress and pore pressure are computed throughout the
3-dimensional volume, and results can be contoured along any horizontal
or vertical plane, or plotted along any line. Settlement deformation can
be viewed in 3-dimensions, magnified by a user-defined scale factor.
Data presentation is highly interactive, and contours and graphs are
updated in real time as you change the data type, depth or location.
Results can be exported to Excel with a single mouse click.Ikon Science RokDoc
RokDoc gives interpreters access to rock physics, forward modelling, seismic inversion, geopressure, advanced quantitative reservoir analysis and geomechanics. It enables asset teams to maximise the value of available data and regional knowledge.
RokDoc is made possible by on-going partnerships between Ikon Science and major oil companies in addition to the over 170 companies directly feeding into its development.
Software and Content: RokDoc works with Ikon Roknowledge regional studies and information from the Ikon MetaStore to provide a content-driven context to jump-start new projects.
Geosolve GWALL 2014, SLOPE 2014 and WALLAP 2013
Geosolve GWALL v3.02, SLOPE v12.04, WALLAP v6.05 [Size: 15 MB] ... 
GWALL (Gravity and Cantilever Wall Analysis Program) analyses a wide range of retaining wall problems including gravity walls and cantilever walls with a base.
SLOPE is a program for analysing the stability of slopes. The program is also applicable to earth pressure and bearing capacity problems. Optional facilities are available for the analysis and design of reinforced soil.
WALLAP is a program for analysing the stability of cantilevered and propped retaining walls. WALLAP is suitable for the analysis of both temporary works, such as sheet pile walls, and permanent works such as reinforced concrete diaphragm walls and contiguous bored pile walls.
GWALL (Gravity and Cantilever Wall Analysis Program) analyses a wide range of retaining wall problems including gravity walls and cantilever walls with a base.SLOPE is a program for analysing the stability of slopes. The program is also applicable to earth pressure and bearing capacity problems. Optional facilities are available for the analysis and design of reinforced soil.
WALLAP is a program for analysing the stability of cantilevered and propped retaining walls. WALLAP is suitable for the analysis of both temporary works, such as sheet pile walls, and permanent works such as reinforced concrete diaphragm walls and contiguous bored pile walls.
NovoTech Softwares
University of SYDNEY Software Suit
LIMSTEEL v3.51, PRFSA v4.014, SupaPurlin v3.2.0, PURLIN v2.8.20, THIN-WALL v2.1.47 [Size: 36 MB] ... LIMSTEEL
Standalone is a user-friendly program for the limit states design of
steel members and connectors according to AS 4100-1998, NZS 3404-1997,
and of Duragal members according to AS/NZS 4600-1996. The program can
also proportion plate web and box girders and their stiffeners. The new
Windows version of the long-established LIMSTEEL Standalone now allows
the design of steel structures to be carried out in a Windows
environment, and to be combined with other Windows programs such as word
processors and drawing and graphics programs.
PRFSA (PLANE RIGID FRAME STRUCTURAL ANALYSIS) is a user-friendly
computer program for predicting the in-plane behaviour of plane rigid
frames. The input data for the program includes the geometry of the
frame, the section and material properties of the frame elements, and
the loading.
SupaPurlin is a computer program for the analysis and design of SupaCee purlins manufactured by BlueScope. The sections can be designed with or without roof sheeting attached. SupaZed sections with roof sheeting can also be designed by modelling the section as an equivalent SupaCee section. The section to be designed is chosen from a library of standard sections.
PURLIN is a computer program for the analysis and design of lipped and unlipped channel, zed and hat section purlins. The sections can be designed with or without roof sheeting attached. Zed sections with roof sheeting can also be designed by modelling the section as an equivalent channel section. Program PURLIN also allows the design of back to back and boxed channels. The program can also design any symmetric or monosymmetric section by the direct strength method.
THIN-WALL is a user-friendly computer program for calculating the section properties and stresses in thin-walled cross-sections of general geometry. The program calculates the section properties, sectoral coordinate, and the longitudinal and shear stresses for the cross-section.
PRFSA (PLANE RIGID FRAME STRUCTURAL ANALYSIS) is a user-friendly
computer program for predicting the in-plane behaviour of plane rigid
frames. The input data for the program includes the geometry of the
frame, the section and material properties of the frame elements, and
the loading.SupaPurlin is a computer program for the analysis and design of SupaCee purlins manufactured by BlueScope. The sections can be designed with or without roof sheeting attached. SupaZed sections with roof sheeting can also be designed by modelling the section as an equivalent SupaCee section. The section to be designed is chosen from a library of standard sections.
PURLIN is a computer program for the analysis and design of lipped and unlipped channel, zed and hat section purlins. The sections can be designed with or without roof sheeting attached. Zed sections with roof sheeting can also be designed by modelling the section as an equivalent channel section. Program PURLIN also allows the design of back to back and boxed channels. The program can also design any symmetric or monosymmetric section by the direct strength method.
THIN-WALL is a user-friendly computer program for calculating the section properties and stresses in thin-walled cross-sections of general geometry. The program calculates the section properties, sectoral coordinate, and the longitudinal and shear stresses for the cross-section.
IES VisualPlate
[Size: 20 MB] ... What will VisualPlate do for you?: Concrete Slab design simplified. Bending analysis for any plate material. With a program dedicated to these tasks, your job is made easier. Integrates with IES VisualAnalysis.
Why use VisualPlate?
You have a number of choices in the marketplace, for wall, slab or plate bending problems--even among IES tools!
VisualPlate shines in a number of areas:
Dedicated to plate bending; easier to use than VisualAnalysis for this task
Automated modeling--the FEA model is built and refined automatically.
Concrete-specific rebar demand for slabs
Von-Mises stress criteria checks for metal plates
What's New in Version 3.0?
IES released the latest upgrade in May 2015 with the following feature additions or improvements.
Numerical Results now offers displacement table
Circle and Polygon plates are now resizable
Concrete details displayed by by FEA plate element, column-line, or plate-area
Custom service load cases may be created
Custom load combinations may be created
Major Benefits and Abilities
Concrete slab analysis and design
"Metal" plate bending (with any material)
Complex geometries, irregular, holes, rounded, etc.
Multiple plate thicknesses or solid properties
Holes in plate
Stiffeners or beams
Elastic spring supports along a line
Unlimited model size
Customizable 'architectural' grid lines
Automated FEA meshing
Flexible edge and point supports
Sophisticated thick-plate finite element formulation
Import & Export DXF files
Export FEA model to VisualAnalysis for more advanced work
Loads and Load Combinations
Customizable load combinations (IBC & ASCE 7 built-in)
Custom service load cases
Plate self-weight may be included
Uniform or linear area loads, rectangular or circular
Rotate area loads in-the-plane
Ring loads (rectangular or circular)
Column loads, axial and moments
Linear loads
Analysis Results
Slab deflections plotted
Moment, Shear values plotted
Nonlinear analysis capabilities
Design Features
IBC 2012, ACI 318-11
Single or double layer of slab reinforcement
Size each layer of slab steel
Export to VisualAnalysis for more complicated tasks
Moment and shear diagrams along any line
Reporting
Full-color reporting for a professional look and easy reading.
Filter reports by load case
Export numerical table to .xls, .pdf, or .html format
Preview the report before printing
Customize what items are included in the report
Print one-page graphic summaries
Usability
Clear graphical displays with selection, zoom, pan
Context-sensative input panels
Customizable units, enter values in any convenient unit or with expressions
Polar coordinate for working with round models
Template projects to jump-start new work
Subscribe to:
Posts (Atom)