Articles by "Softwares"

Showing posts with label Softwares. Show all posts

ASDIP Foundation is a suite of modules specifically dedicated to the design of concrete footings, based on the latest IBC / ACI 318 specifications, that greatly simplifies the time-consuming calculations in any structural engineering office. 

ASDIP Foundation includes the design of the following types of concrete footings: - Spread Footings: Design of a concrete spread footing under the action of vertical load, horizontal load and biaxial bending. This module designs the footing per the load combinations of the ASCE 7. - Strap Footings: Design of a concrete strap footing under the action of vertical loads, horizontal loads and bending moments. This module designs the two footings and the strap beam per the load combinations of the ASCE 7.Combined Footings: Design of a concrete combined footing under the action of vertical loads, horizontal loads and bending moments. This module designs the combined footing per the load combinations of the ASCE 7.

Key Benefits of ASDIP Foundation: Quickly model your concrete footings with the simple and efficient graphical user interface. + Confidently optimize your design and comply with design Code provisions. + Impress clients and plan-checkers with eye-catching condensed or detailed reports. + Extensive documentation, solved examples, and blog posts to guide you throughout the software. + Use your valuable time wisely while ASDIP FOUNDATION does the hard work for you. + Create, organize, manage, and store your electronic calculations safely.

ASDIP Retain is a suite of modules specifically dedicated to the design of retaining walls, based on the latest IBC / ACI 318 specifications, that greatly simplifies the time-consuming calculations in any structural engineering office.

ASDIP Retain includes the design of the following two types of retaining walls: - Cantilever Retaining Walls: Design of a retaining wall supported only at the base under the combination of earth pressure, surcharge, wind and seismic loads. The module designs the wall per the load combinations of the ASCE 7. - Restrained Retaining Walls: Design of a retaining wall supported at the base and laterally restrained at the top, also known as a basement wall, under the combination of earth pressure, surcharge, wind and seismic loads. The module designs the wall per the load combinations of the ASCE 7.

Key Benefits of ASDIP RETAIN:
 Quickly model your retaining walls with the simple and efficient graphical user interface. + Confidently optimize your design and comply with design Code provisions. + Impress clients and plan-checkers with eye-catching condensed or detailed reports. + Extensive documentation, solved examples, and blog posts to guide you throughout the software. + Use your valuable time wisely while ASDIP RETAIN does the hard work for you. + Create, organize, manage, and store your electronic calculations safely.

Trimble Tekla Structural Design Suite 2020 SP5 [Size: 1.04 GB] ...
Tekla Structural Designer is a powerful building analysis and design tool for design engineers working in the commercial building design industry. Tekla Structural Designer complements the core Tekla Structures software and allows you to take full advantage of all the benefits of 3D modeling through a single workflow that includes both analysis and design. Tekla Structural Designer is intelligent data loading, a wide range of analytical functions, full design automation, high quality documentation and a complete complete BIM system. All this helps engineers to improve efficiency and reduce costs / expenses when creating projects.

Tekla Structural Designer offers powerful tools for working with reinforced concrete and metal structures, allowing engineers to quickly compare different design schematics, effectively manage changes, and create a seamless collaboration environment. Fully automated design and analysis, improved tools and increased productivity allow engineers to propose more design alternatives, no matter the size or complexity of the facility, thereby providing a high quality customer experience.

Leveraging BIM technology is what was in the minds of the developers when Tekla Structural Designer was created. Using Tekla Structural Designer, engineers can repeatedly synchronize models with Tekla Structures and other software without compromising key design data. Ongoing tool auditing in Tekla Structural Designer allows engineers to see what has been added, changed, or removed during the integration process, thereby reducing the risk of errors and improving collaboration with other project team members, including technicians, recyclers and architects. Tekla Structural Designer creates an internal link and effective communication between all professionals working on a project.

PLAXIS MoDeTo CONNECT Edition V20 UpDate 4 [Size: 1.6 GB] ...
 PLAXIS MoDeTo (Monopile Design Tool) is a PLAXIS-based specific tool providing anenhanced design methodology for monopile foundations under lateral loading. Monopiledesign can be performed efficiently by using one-dimensional (1D) finite element (FE)analyses of a laterally loaded pile. The adopted design methodology is based on the PIleSoil Analysis (PISA) joint industry research project.The monopile is modelled by means of the Timoshenko beam theory whereas the soilreaction is modelled using calibrated or user-defined soil reaction curves. The calibrationof the soil reactions is based on three-dimensional (3D) finite element calculations usingPLAXIS 3D. In addition to the 1D design analysis, the design tool facilitates thegeneration and calculation of the PLAXIS 3D models, and the derivation of the soilreactions based on the calculation results. A real installation site can be represented withfinite element models in PLAXIS 3D and a site-specific 1D model can be calibrated andused for the design of monopile foundations.

The PLAXIS development team is pleased to announce the availability of PLAXIS MoDeTo CONNECT Edition V20 Update 4 is a software package intended for the design of monopiles asfoundation elements for offshore wind turbines under lateral loading conditions. New and improved features; * improved regeneration for the design verification model, for cases where only the workload values are changed * input tables in soil and calibration modes now accommodate copying and pasting of values * improved visualization of the step changes at layer transactions on shaft depth variation function charts * added functionality to import multiple soil reaction curves files in analysis mode * improved algorithm for simplification of the curves that are exported to SACS * added support for exporting pile base curves to SACS. Fixed issues;* fixed issue with loading projects that contained the number symbol (#) in the name * fixed the initial mobilization value for the NGI-ADP model in over-consolidated clay (K0 > 1).

Statgraphics Centurion 19.1.1 for x64 [Size: 188 MB] ... Statgraphics Centurion 18 is a comprehensive Windows desktop product for statistical analysis, data visualization and predictive analytics. It contains over 260 procedures covering a wide range of data analysis techniques. Statgraphics 18 features an easy-to-use GUI that does not require learning a complicated command language. Especially helpful to practitioners is the StatAdvisor, which explains the results of statistical analyses in a manner suitable for presentation to non-statisticians. Statgraphics 18 is a major upgrade that contains many new features, including: A new file format for handling big data. The 64-bit version can now analyze datasets containing in excess of 100 million rows. * 9 new interactive Statlets for dynamic data visualization, including sunflower plots, population pyramids, wind roses, and violin plots. * Improved demographic maps, with support for SHP files. * Dialog-box driven procedures for accessing R libraries to use classification and regression trees (CART), text mining, multidimensional scaling, analysis of arbitrarily censored data, and seasonal adjustment with X-13ARIMA-SEATS. * Over a dozen other new statistical procedures, including equivalence analysis and noninferiority testing, orthogonal regression, capability control charts, multivariate tolerance intervals, tests for multivariate normality, and random number generation for multivariate normal distributions. * New definitive screening designs in the DOE Wizard.* A new network installation program which allows users to check out seats for use on individual computers. * Extensive enhancements to the process capability analysis procedures to implement the methods described in the new book by Dr. Neil W. Polhemus, Process Capability Analysis: Estimating Quality to be published by Chapman and Hall/CRC Press in December, 2017.

Wolfram Mathematica v12.1.1 [Size: 4.26 GB] ...  Mathematica is a symbolic mathematical computation program, sometimes called a computer algebra program, used in many scientific, engineering, mathematical, and computing fields. It was conceived by Stephen Wolfram and is developed by Wolfram Research of Champaign, Illinois. The Wolfram Language is the programming language used in Mathematica. For more than 25 years, Mathematica has defined the state of the art in technical computing—and provided the principal computation environment for millions of innovators, educators, students, and others around the world. Widely admired for both its technical prowess and elegant ease of use, Mathematica provides a single integrated, continually expanding system that covers the breadth and depth of technical computing—and with Mathematica Online, it is now seamlessly available in the cloud through any web browser, as well as natively on all modern desktop systems.

Extend your capabilities with PLAXIS 2D v20 + Update 4 [Size: 1.30 GB] ... Cross and parallel permeability in interfaces: In the Interfaces tab of the material dataset users can now select between permeable, impermeable and semi-permeable options to define the cross permeability.  Parallel permeability is defined here as well. Output facilities have been extended with options to inspect the flow through and along the interfaces. 

Non-linear geogrids: Elastoplastic (N-ε) & Viscoelastic (time-dependent): PLAXIS 2D 2017 introduce two new types of behavior for geogrids. Users can now include elastoplastic, or viscoelastic behavior. For the elastoplastic behavior user can define N-epsilon diagrams. With the viscoelastic behavior, creep can be taken into account for geogrids. Multiply command for numeric properties (VIP): The multiply command can be used to for instance multiply a set of loads with various load components by a factor higher or lower than 1. This command can be issued in the various modes on numerous objects, and especially for staged construction offers a convenient way to explore alternate load conditions, thermal conditions, initial conditions etc. Command line improvements: 2D brings some improvements for the command line window. Users can now right click in the command line window and choose the Pop-out option to detach the command line window from the program. In addition some extra options to copy all successful commands or responses are available. 

Other features: Grout anchor behavior for Embedded beam rows - Directly input the element dimension in the expert settings of the mesh menu - Time shown in Output plot title for calculations where a time component is defined - Soil layering based on Robertson interpretation for imported CPT borehole data (VIP) - Hoek-brown model available in Design approaches (VIP) - Multiselect-on-click behavior for selecting overlapping objects of the same type - Grouped clusters based on material assignment in Output Model explorer - Equivalent force arrow can be hidden from cross sections - Inverse analysis settings in SoilTest can be now be saved.

PLAXIS 3D + Update 4 [Size: 1.30 GB] ... Plaxis 3D is a finite element package intended for three-dimensional analysis of deformation and stability in geotechnical engineering. It is equipped with features to deal with various aspects of complex geotechnical structures and construction processes using robust and theoretically sound computational procedures. With PLAXIS 3D, complex geometry of soil and structures can be defined in two different modes. These modes are specifically defined for Soil or Structural modelling. Independent solid models can automatically be intersected and meshed. The staged constructions mode enables a realistic simulation of construction and excavation processes by activating and deactivating soil volume clusters and structural objects, application of loads, changing of water tables, etc. The output consists of a full suite of visualization tools to check details of the complex inner structure of a full 3D underground soil-structure model. 

PLAXIS 3D is a user friendly 3d geotechnical program offering flexible and interoperable geometry, realistic simulation of construction stages, a robust and reliable calculation kernel, and comprehensive and detailed post-processing, making it a complete solution for your daily geotechnical design and analysis.

MathWorks MATLAB R2020b v9.9.0.1467703 [Size: 20.8 GB] ... MATLAB is a highlevel language and interactive environment that is used by millions of engineers and scientists around the world. It allows you to explore and visualize ideas and collaborate in various disciplines, including signal and image processing, communications, management systems and financial engineering. Whether you’re analyzing data, developing algorithms, or creating models, MATLAB is designed for the way you think and the work you do. MATLAB toolboxes are professionally developed, rigorously tested, and fully documented. MATLAB apps let you see how different algorithms work with your data. Iterate until you’ve got the results you want, then automatically generate a MATLAB program to reproduce or automate your work. Scale your analyses to run on clusters, GPUs, and clouds with only minor code changes. There’s no need to rewrite your code or learn big data programming and out-of-memory techniques. Features of Mathworks Matlab R2020b v9.9: Perform a variety of complex mathematical calculations and heavy + Development environment for managing code, files, and data + Explore ways to achieve this solution + A variety of mathematical functions for linear algebra, statistics, Fourier analysis, optimization, filtering, numerical integration and … + Drawing two-dimensional and three-dimensional graphics functions for visualizing data as + Design and construction of user interfaces under the programming languages ​​C ++, C or Java + Ability to test and measure the exact functions and graphs + The possibility of communication signal processing, image and video + There are various Jbhabzarhay engineering companies for specific applications such as + Telecommunications, control, fuzzy, estimates, statistics, data collection, simulation systems.

Rocscience Phase2 v8.024 x64 [Size: 209 MB] ... RS2 (Phase2 8.0) is a powerful 2D finite element program for soil and rock applications (RS2 = Rock and Soil 2-dimensional analysis program). RS2 can be used for a wide range of engineering projects and includes excavation design, slope stability, groundwater seepage, probabilistic analysis, consolidation, and dynamic analysis capabilities.

Complex, multi-stage models can be easily created and quickly analyzed - tunnels in weak or jointed rock, underground powerhouse caverns, open pit mines and slopes, embankments, MSE stabilized earth structures, and much more. Progressive failure, support interaction and a variety of other problems can be addressed. RS2 offers a wide range of support modeling options. Liner elements can be applied in the modeling of shotcrete, concrete, steel set systems, retaining walls, piles, multi-layer composite liners, geotextiles, and more. Liner design tools include support capacity plots, which allow you to determine the safety factor of reinforced liners. Bolt types include end anchored, fully bonded, cable bolts, split sets, and grouted tiebacks. One of the major features of RS2 is finite element slope stability analysis using the shear strength reduction method. This option is fully automated and can be used with either Mohr-Coulomb or Hoek-Brown strength parameters. Slope models can be imported or exported between Slide and RS2 allowing easy comparison of limit equilibrium and finite element results. RS2 includes steady-state, finite element groundwater seepage analysis built right into the program. There is no need to use a separate groundwater program. Pore pressure is determined as well as flow and gradient, based on user defined hydraulic boundary conditions and material conductivity. Pore pressure results are automatically incorporated into the stress analysis. Material models for rock and soil include Mohr-Coulomb, Generalized Hoek-Brown and Cam-Clay. Powerful new analysis features for modeling jointed rock allow you to automatically generate discrete joint or fracture networks according to a variety of statistical models. With new 64-bit and multi-core parallel processing options RS2 can solve larger and more complex models in shorter times.

Lindo What'sBest! v17.0.0.0 x64 [Size: 57.7 MB] ... What'sBest! is an add-in to Excel that allows you to build large scale optimization models in a free form layout within a spreadsheet. What'sBest! combines the proven power of Linear, Nonlinear (convex and nonconvex/Global), Quadratic, Quadratically Constrained, Second Order Cone, Semi-Definite, Stochastic, and Integer optimization with Microsoft Excel - the most popular and flexible business modeling environment in use today. The recently released What'sBest! 15.0 includes a number of significant enhancements and new features. Enhancements to the Simplex solvers boost performance on linear models. Large models solve an average of 20% faster using primal simplex and 15% faster for dual simplex. New symmetry detection capabilities dramatically reduce the time required to prove optimality on certain classes of models with integer variables. Performance has been improved on Markowitz portfolio problems with minimum buy quantities, and/or limit on number of instruments at nonzero level. Other enhancements provide faster solutions on certain task assignment-like models. Stability and robustness of the Global solver has been improved through several enhancements to quadratic recognition and range reduction. Improved exploitation of convexity of certain ratio constraints, e.g., as found in heat exchanger network design problems. Several new functions and constraint types are recognized, e.g., the =WBALLDIFF() All Different constraint, for general integer variables. The =WBALLDIFF() function allows one to specify a set of integer variables, such that each variable in the set must have a unique value, different from all other variables in the set.

EnSoft Suite 2020 [Size: 683 MB]: Developing and applying software solutions to complex engineering problems ... LPILE - Analyze response of piles and shafts in multi-layered soil media. + APILE - Analyze the axial capacity of driven piles in mutli-layered soils. + GROUP - Analyze response of pile groups in multi-layered soil media. + PYWall - Analyze flexible retaining walls in layered soils. + SHAFT - Study the response of drilled shafts under axial loading. + TZPILE - Analyze load-settlement relationships of vertically loaded piles with downdrag. + EnFEM - 2D finite element analysis with ability to perform soil-structure interaction and stage construction. + EnCPT - Process raw CPT data, generating and exporting soil layering and properties to LPILE. + DynaN - Determine the dynamic response of shallow and deep foundations. + DynaPile - Analyze the dynamic response of pile groups in horizontally layered elastic media. + DynaMat - Analyze the dynamic response of mat foundations under dynamic loading. + GeoMat - Analyze mat or structural slabs supported on soil media. + SETOFF - Software for computing foundation settlement. + STABLPRO - Software for computing the slope stability.

Golden Software Grapher v16.4.432 [Size: 109.0 MB] ... Grapher is the ultimate technical graphing package available. This easy-to-use, powerful, dynamic program will help you create superior publication-quality professional graphs in minutes! Wow your audience every time they see your graphs. Create one of more than 60 unique graph types. Create 2D or 3D line, scatter, function, class scatter, bubble, step, vector, bar charts, and floating bar chart graphs. Create line, scatter, class scatter, vector, bar, rose, wind, and radar polar plots. Create line, scatter, class scatter, or bubble ternary diagrams. Display high-low-close, candlestick, or stiff diagram specialty plots. Create statistical graphs including box-whisker plots, 2D and 3D histograms, 2D and 3D pie charts, 2D and 3D doughnut plots, Q-Q plots, and normal Q-Q plots. Alter any portion of the graph, axes, or plot for complete control of your display.

GEO5 [Size: 1.05 GB] is a set of standalone programs that allows you to solve most of the geotechnical tasks. All programs have a similar user interface and are able to exchange data with each other. Each of them performs a comprehensive check of a specific type of design.

Key features: Stability Calculations - Check the stability of slopes, rock walls and fortified embankments. + Fencing structures - designing and checking the enclosing structures of foundation pits, underground structures. + Walls and supporting structures - Due diligence of walls and gabion structures. + Shallow foundations - checking the bearing capacity and settlement of individual strip and slab foundations. + Deep foundations - checking the bearing capacity and settlement of piles and pile clusters. + Settlement - calculation of settlement and consolidation, settlement of shallow and deep foundations. + Tunnels and Shafts - Analyze tunnels, underground structures, and vertical shafts. + Geological surveys - creating a model of the tunnel and base layers based on geological survey data. + Field Tests - Structural calculations based on field test data (SPT, CPT, DMT, PMT)

Adobe Acrobat Pro DC v2020.006.20042 [Size: 689 MB] ... Acrobat for the first time makes it almost as easy to edit text and graphics in a PDF as it is in a word-processor, though with significant limitations that I’ll get to in a moment. The formerly clumsy process of merging documents into a single PDF now gets a streamlined and powerful interface. New form-editing and document-signing features make it easier than ever to add electronic signatures to documents via computers, tablets, and smartphones. Acrobat XI preserves the simplified interface that Adobe introduced in Acrobat X, but it’s learned a lot of smooth new moves. For anyone who (like me) regularly creates PDF files, the best new feature in Acrobat XI is its completely overhauled and enhanced ability to edit PDF documents. Acrobat always included touch-up features for correcting typing errors or replacing a few words, but the results often looked bad and the whole process felt clumsy. Now, when you click Edit Text & Images in Acrobat’s Content Editing tools, every paragraph in the document appears with an outline around it, and you can simply click inside a paragraph and start typing—or you can run a Find and Replace if you need to change the name of your new product a hundred times in the same document. As you edit, words wrap correctly at the ends of lines. Formatting icons let you change paragraph alignment, so you can get full justification instead of ragged-right formatting. If you click a plus-sign icon next to the Format item on the editing menu, you get access to detailed typographic controls over kerning and spacing, just as in Adobe’s high-end graphics and layout software. You get similar power over images. Right-click on an image and the menu offers options to flip or rotate the image, plus an option to replace the image entirely.

Foxit PhantomPDF Business v10.0.0.35798 [Size: 702 MB] ... Foxit PhantomPDF formerly known as Foxit Advanced PDF Editor is a comprehensive PDF solution that caters to the needs and requirements of businesses and personal users. It comes with an intuitive, user-friendly interface and an extensive set of advanced, PDF editing and security tools and applications. Its familiar interface makes adoption and implementation by users fast and seamless.With Foxit PhantomPDF, users of all types are provided with a full-featured PDF software that allows them to create, edit, comment, collaborate and share, secure, organize, export, scan, and sign PDF files and forms.

Advanced PDF Editor enables users to convert multiple file formats to PDF and vice versa. It can convert PDF files to Microsoft Word documents, Excel, and other popular document formats. The software also features multiple language support, making it an ideal PDF solution for businesses and individuals based in other countries. Foxit PhantomPDF grants you total control over your content with its ConnectedPDF functionality. You can convert your regular PDF documents too ConnectedPDF in one step, create and manage multiple versions of that document, and track all activities pertaining to that document. That means you can monitor who opens your PDFs, when they opened it, and where. All actions they performed on the document are all recorded. Integrations with Google Drive, Box, Dropbox, and OneDrive among others allow Foxit Advanced PDF Editor users to collaborate, share, and annotate with ease and speed. They can work on documents, provide feedback, and become more productive within the PhantomPDF environment.

CSI ETABS v18.1.1 Build 2148 x64 [Size: 950 MB] ... The innovative and revolutionary new ETABS is the ultimate integrated software package for the structural analysis and design of buildings. Incorporating 40 years of continuous research and development, this latest ETABS offers unmatched 3D object based modeling and visualization tools, blazingly fast linear and nonlinear analytical power, sophisticated and comprehensive design capabilities for a wide-range of materials, and insightful graphic displays, reports, and schematic drawings that allow users to quickly and easily decipher and understand analysis and design results. From the start of design conception through the production of schematic drawings, ETABS integrates every aspect of the engineering design process. Creation of models has never been easier - intuitive drawing commands allow for the rapid generation of floor and elevation framing. CAD drawings can be converted directly into ETABS models or used as templates onto which ETABS objects may be overlaid. The state-of-the-art SAPFire 64-bit solver allows extremely large and complex models to be rapidly analyzed, and supports nonlinear modeling techniques such as construction sequencing and time effects (e.g., creep and shrinkage). Design of steel and concrete frames (with automated optimization), composite beams, composite columns, steel joists, and concrete and masonry shear walls is included, as is the capacity check for steel connections and base plates. Models may be realistically rendered, and all results can be shown directly on the structure. Comprehensive and customizable reports are available for all analysis and design output, and schematic construction drawings of framing plans, schedules, details, and cross-sections may be generated for concrete and steel structures. ETABS provides an unequaled suite of tools for structural engineers designing buildings, whether they are working on one-story industrial structures or the tallest commercial high-rises. Immensely capable, yet easy-to-use, has been the hallmark of ETABS since its introduction decades ago, and this latest release continues that tradition by providing engineers with the technologically-advanced, yet intuitive, software they require to be their most productive.

StataCorp Stata MP v16.0 [Size: 337 MB] ... StataCorp Stata MP 16 for Windows PC also known as Stata/MP provides the most extensive multicore support of any statistics and data management package. Stata/MP is the fastest and largest version of Stata. Almost every computer can take advantage of the advanced multiprocessing capabilities of Stata/MP. Stata/MP lets you analyze data in one-half to two-thirds the time compared with Stata/SE on inexpensive dual-core laptops and in one-quarter to one-half the time on quad-core desktops and laptops. Stata/MP runs even faster on multiprocessor servers. Stata/MP supports up to 64 cores/processors. Stata/SE can analyze up to 2 billion observations. Stata/MP can analyze 10 to 20 billion observations on the largest computers currently available and is ready to analyze up to 1 trillion observations once computer hardware catches up. Stata/MP also allows 120000 variables compared to 32767 variables allowed by Stata/SE. Some procedures are not parallelized and some are inherently sequential, meaning they run the same speed in Stata/MP. For a complete assessment of Stata/MP’s performance, including command-by-command statistics. Stata/MP is the multiprocessor and multicore version of Stata. It’s primary purpose is to run faster. Most of the new features in Stata have been parallelized to run faster on Stata/MP, sometimes much faster.

WinRAR v5.90 (x86 and x64) [Size: 5.86 MB] ... WinRAR is a powerful archive manager. It can backup your data and reduce the size of email attachments, decompress RAR, ZIP and other files downloaded from Internet and create new archives in RAR and ZIP file format. You can try WinRAR before buy, its trial version is available in downloads. 1. Following issues are corrected in Windows high DPI mode: If text size in Windows settings was set to 150% or larger, the font size in WinRAR help was not increased accordingly, resulting in too small text; + default columns width in WinRAR file list was less than expected for 125% or larger Windows text setting. 2. Interface improvements for right to left languages: Proper text alignment in simple WinRAR prompts, such as confirmations to delete archived files or to clear the log file; + "OK", "Cancel", "Help" buttons in multi-page dialogs, such as archiving and extraction options or WinRAR settings, are aligned correctly and translated to default Windows display language. 3. Bugs fixed: WinRAR SFX module could load DLL libraries from its own executable folder as a result of calling some Windows API functions. It could lead to security threat if DLL files with malicious code were stored in the same folder as SFX archive. Now SFX module takes additional steps to prevent such situation in Windows Vista and newer. Be aware that users without latest Windows security patches installed also as Windows XP users still can be affected, so they must be especially careful to run SFX archive from a folder without suspicious DLL files; + WinRAR 5.30 failed to run .lnk files from file list.

AutoDesk AutoCad 2021 x64 [Size: 1.59 GB] ... Autodesk AutoCAD 2020 design and documentation software, of the world’s leading 2D and 3D CAD tools. It will allow you to design and shape the world around you using its powerful and flexible features. Speed documentation, share ideas seamlessly, and explore ideas more intuitively in 3D. With thousands of available add-ons, AutoCAD software provides the ultimate in flexibility, customized for your specific needs. It’s time to take design further. AutoCAD 2020 enables you to create and explore ideas like never before. It is all you need to create, visualize, document, and share your ideas. From conceptual design through drafting and detailing. Import a wide variety of other formats including SolidWorks, Pro/ENGINEER, CATIA, Rhino, and NX. Drawing views, edge display, and location are instantly updated when an engineering change is made.

Contact Form

Name

Email *

Message *

Theme images by Colonel. Powered by Blogger.